Following are some pros and cons of building a straw bale house. Like any building material, it is always best to evaluate your needs and your goals before committing to a particular material. Green building offers a wide range of options in achieving energy efficiency. When appropriate for your project, straw bale construction has many benefits.

Advantages of straw bale construction
1. Straw bales are made from a waste product. Once the edible part of the grain has been harvested (such as wheat or rice), the stalks often become a disposal problem for farmers. By bailing the straw, a new life is given to the material. The farmer makes some money by selling the bales and the homebuilder gains an excellent insulation and building material.

2. Homes insulated with straw bale can have insulation values of R-30 to R-35 or more. The thicker the bale, the better the R-value.

3. Straw bale walls are at least eighteen inches thick. This adds aesthetic value to the home as thick wall are expensive to achieve with conventional construction. The thickness of the wall helps to reflect sunlight throughout the room.

4. Due to the thickness of straw bale walls, every window can have a window seat or shelf. This becomes both an aesthetic and practical design element. (more…)

The greening of this downtown loft apartment will be a topic in this new series on how to adapt older buildings to higher ecological standards.

In my DVD video and book, “Building With Awareness,” I show the design and construction process of building a green home from scratch. With an emphasis on green building materials and the benefit of having complete control over the constructions process, you can see each stage of creating an energy efficient home from the ground up. By using a variety of natural materials such as straw bale, adobe, and earth plasters, it is possible to build an extremely green home with off-the-shelf components. For those who have the opportunity to start with a clean slate and an empty piece of land, this is an efficient way to go.

But what if you need to buy or rent a home that is already built? What if you desire to live in a city and the ability to use less-conventional materials is limited? After all, retrofitting existing buildings and homes will be an even larger industry than building new green structures. Millions of homes already exist and the majority of them need to be brought up to better energy efficiency standards.  How do you improve energy efficiency, lower your power bills, and limit your carbon footprint? (more…)

This article will show how to attach commercially available solar panel mounting brackets to a corrugated metal roof that lacked flat surfaces. In the photo above, a ladder was used to slide the PV panels to the roof.

Photovoltaic (PV) panels produce all of the electricity for this straw bale hybrid home from sunlight. All of the PV panels are permanently attached to the south facing pitched roof.  Standing-seam metal roofs are partially flat, so mounting a rack is not a problem.  The roof on my house is corrugated metal and therefore has no flat surfaces for the aluminum mounting brackets to seat.  A stout connection is essential for the photovoltaic panels to survive high wind loads and to create a waterproof seal where the bolts penetrate the roof surface. What we needed was a mounting platform that both comformed to the convolutions of the metal roof and also had a flat surface for the foot bracket to contact.

Here is how we solved the problem. (more…)